Kyoritsu Earth Testers KEW 4300

Kyoritsu Earth Testers KEW 4300

The new KEW 4300 is a simplified earth resistance tester (based on a 2-pole approach) that may be used for a variety of distribution lines and electrical appliances, as well as measuring AC/DC voltage. (As with AC voltages, accurate RMS values are available.)

kyoritsu kew 4300 Features

• 200/2000Ω (2 ranges): auto-ranging.
• Warning buzzer triggered at 100Ω or less.
• LED lights up when a large earth voltage is detected.
• Live circuit warning when 30V or higher voltage is detected. (KEW 4300 detects voltage even when measuring resistances.)
• LED light for illuminating measurement points.
(It turns on/off automatically in relation to the ambient brightness.)
• Small test current (max 2mA) not triggering RCD

Kyoritsu Earth Testers KEW 4300 Kit

What does an earth tester do?

A soil resistance measurement device is a grounding resistance tester, often known as an earth tester. It is used to measure and project grounding grids.

How do you use an earth tester meter?

1-Locate the grounding rods outside your home. …
2-Insert two probes of the earth tester into the ground in a parallel line to your grounding rod. …
3-Clip the wires of the earth tester onto the rods. …
4-Turn on the earth tester and press “Start.” Digital earth testers will provide a reading of resistance.

earth testers kyoritsu manual

 KEW4300 simplified earth testers manual and datasheet, It won’t matter much to those who know how to use an earth tester, but new users can have a hard time. However, most of it is self-explanatory and you also have the online manual to refer to if you get stuck.

Kyoritsu Earth Testers KEW 4300 Manual

other products

You can check our other products like Kyoritsu Earth Testers MODEL 4102A, Kyoritsu Earth Testers KEW 4105DL-H, Kyoritsu Earth Testers KEW 4105A, and Kyoritsu Earth Testers KEW 4300 on our website.

kyoritsu 4300 new simplified earth specifications:

• Earth resistance ranges: 200.0/2000Ω (Auto-ranging)
  ±3%rdg±5dgt
• Voltage ranges : AC: 5.0 – 300.0V (45 – 65Hz)±1%rdg±4dgt
  DC: ±5.0 – 300.0V±1%rdg±8dgt
• Applicable standards: IEC 61010-1 CAT III 300V pollution degree 2
  IEC 61010-031, 61557-1, -5
  IEC 61326-1, 2-2, IEC 60529 (IP40)
• Power source : LR6(AA)(1.5V) × 2pcs
• Dimensions : 232(L) × 51(W) × 42(D)mm
• Weight: 220g approx. (including battery)

Working procedure of Kyoritsu Earth Testers KEW 4300