Kyoritsu LOOP/PFC/PSC Testers KEW 4140

Kyoritsu LOOP/PFC/PSC Testers KEW 4140

The Kyoritsu 4140 LOOP/PFC/PSC Tester comes complete with everything you need for Loop, PFC, PSC, and Phase rotation testing on an electrical installation according to the IEC 60364-6 (or its national equivalent standard).

The Kyoritsu 4140 measures prospective short current (PSC) and prospective fault current (PFC), phase rotation testing, and both voltage and frequency. Designed to comply with an IP54 rating, the 4140 features anti-trip technology for trip-free loop testing on RCDs rated to 30mA or above.

The Kyoritsu kew 4140 can test loop impedance up to 2000Ω via its 15mA AC test current. The prospective short current (PSC) and prospective fault current (PFC) can be read, and the featured anti-trip technology allows trip-free loop testing on all RCDs rated to 30mA or above. The dual digital display allows simultaneous measurements to be presented, such as the loop and PFC/PSC.

Kyoritsu LOOP/PFC/PSC Testers KEW 4140 specifications:

• Phase Rotation:

• Operating Voltage:50 – 500V, 45 – 65Hz
• Remarks:Correct phase sequence: displayed “1.2.3” and  mark
  Reversed phase sequence: displayed “3.2.1” and  mark

• Applicable standards: IEC 61010-1 CAT III 300V (500V L to L),
  IEC 61010-031, IEC 61557-1, 3, 7, 10,
  IEC 60529 (IP54), IEC 61326 (EMC)
• Power source:1.5V AA batteries × 6 *Use of alkaline batteries (LR6) is recommended.
• Dimensions:1.5V AA batteries × 6 *Use of alkaline batteries (LR6) is recommended.
• Dimensions:84 (L) × 184 (W) × 133 (D) mm
• Weight:860g (including batteries)
• Included Accessories: Main cord (*3)
  Distribution board test lead (*4)
  9155 (Shoulder strap)
  9156 (Soft case)
  LR6 (Battery) × 6, Instruction manual